7 Orac Decor® tips for your interior

Just use a few smart and easy interior tricks and you will have optically increased and revived your space. A modern cornice here, some elegant incorporated LED lighting or a cool panel moulding there and your interior will look like it has been designed by an interior specialist. We will now reveal our seven best tips. From Orac Decor®, to you!

1. Hide imperfections behind an elegant cornice

Uplighters – lamps that light upwards – are an ideal way to add atmosphere. But sometimes they light up corners of the room you would prefer not to have in the spotlight. A ceiling with a less-than-perfect finish or a seam between the ceiling and wall... An Orac Decor® cornice elegantly gets rid of these seams and imperfections. But what's more, a beautiful cornice really adds the finishing touch to your room!

Orac Decor Hide Irregularities with Cornices



C381- L3


2. Optically increase the size of your entrance hall

Is your entrance hall on the small side? You can optically increase its size by using your lighting in a smart way. Simply place indirect lighting along the full length of the wall or ceiling. This will add a lot of depth to your entrance hall and give it a modern look.


C380 – L3


C383 – L3


3. Boring wall? Revive it by using wallscaping

You can revive a wall that looks boring and flat with wallscaping. A beautiful panel moulding – modern or romantic, depending on the style of your interior – instantly adds a lot of character to your wall. These panel mouldings are extremely easy to use and serve as an extra protection layer for your walls. A bonus, certainly in a tight hall or entrance hall where bikes or buggies regularly pass through.

PX147 - PX169 - DX119 - D310 - SX118









>> Read more? Wainscoting: something for everyone

Do you wish to give your interior a sleek, geometric look or hide some imperfections on your walls or ceiling? The 3D Wall Panels from Orac Decor® allow you to experiment with modern shapes and colours to your heart's content. Easy, handy and original!

Orac Decor Bring Wall to Life with 3D Wall Panels

W101 - Trapezium


4. How to add height to your interior

Are your ceilings slightly low, making your interior look smaller? By integrating room-size frames in your indoor space, you can optically raise your ceiling height. If you place the broadest part of a cornice against the wall, you optically push the ceiling upwards. You can create the same effect by using indirect lighting at the top of your walls: the reflection of the light will make your ceiling seem higher. And finally, don't forget to give the bottom of your walls a beautiful finish. You create the illusion of a higher ceiling by using skirting boards in the same colour as the wall.

C217 + P8030D + P8030 + P9010 + SX118











>> Read more? Enlarge your space with Orac Decor® products

5. Smart use of indirect lighting

By integrating indirect lighting in a smart way, not only are you creating more space, but you are also adding lots of atmosphere. What about, for example, soft LED lighting incorporated in the banister to accentuate the sleek lines of your stairs?

L3 C381

C381 – L3


You can add depth to a space by incorporating indirect lighting into the farthest wall in order to emphasise it.

CX126 + C362



C362 Curve


>>Read more? Cornices for indirect l ighting

6. Create unity in your interior

Create a peaceful and unified interior by using the frames throughout as much as possible. The water-resistant Orac Decor® skirting boards are made of Duropolymer®, and can even be used in the shower. The result? Your bathroom will instantly look much bigger. You can create that same effect if you use curtain profiles along the full length of your wall.

Orac Decor Unity in Interior with Skirting Boards



Creating unity and creating a modern look? Just use multifunctional skirting boards that contrast with the floor and wall and let them continue around the door. Trendy effect guaranteed!

Orac Decor Unity in Interior with Multifunctional Profiles



7. Sloping ceiling? This is how you add the best finish

Creating a beautiful finish on a sloping ceiling? That's not so easy. The wide angle between the roof and wall make it impossible to use a standard cornice. Luckily, Orac Decor® has now found a beautiful and handy solution of getting rid of the seam between the wall and the roof: the multifunctional profile. All you need to do is place it against the sloping ceiling and you're done!




Were you used to using gyproc panels to add the finish to sloping ceilings? And are you tired of the hassle of plastering the seams of that panelling? If so, just use the multifunctional frame to get rid of the seams. You will create a modern line pattern on your ceiling at the same time: stylish!




Can't get enough of our tips?

Be sure to check out the full overview of all the Orac Decor® Tips & Tricks

Don't miss our weekly Orac Inspiration on Fridays. Follow us on Facebook and Instagram.

Inspiration guaranteed!

Facebook Icon     Instagram Icon

Want to stay up to date with the latest products, interior tips and more?

Subscribe to our newsletter.


webdesign & development by DigitalMind | Powered by eXopera